Sourcing aluminum raw materials for fabrication, marine engineering, architectural panels, or pressure vessels in Malaysia requires full compliance with local regulatory frameworks and construction standards. For industrial fabricators, stockists, and procurement managers in Malaysia, selecting certified plain aluminum sheets and plates is critical to pass CIDB inspections, meet project specifications, and avoid customs clearance bottlenecks.
Henan Mingsheng New Material Technology Co., Ltd., a wholly owned subsidiary of Henan Mingtai Al. Industrial Co., Ltd. (Mingtai Aluminum), holds official Product Certification from SIRIM QAS International under the MS 2040:2017 standard (Licence No. PC016281).
Supplying under our registered trademark TAI HONG, we manufacture and export mill-finish aluminum plain sheets and medium-to-thick plates directly from our rolling mills to Malaysian ports, including Port Klang and Penang.
Technical Scope: SIRIM MS 2040:2017 Certified Alloys and Dimensions
The scope of our SIRIM MS 2040:2017 product certification covers mill-finish plain aluminum sheets and plates across the 1xxx, 3xxx, 5xxx, 6xxx, and 7xxx alloy families. All products are delivered with certified chemical composition, verified tensile properties, and full Mill Test Certificates (MTC / EN 10204 3.1).
Certified Plain Aluminum Sheet & Plate Specifications (MS 2040 Standard)
Brand/Trademark: TAI HONG | Certified Licensee: Henan Mingsheng New Material Technology Co., Ltd.
| Alloy | Temper | Product Form | Thickness Range (mm) | Max Width (mm) | Max Length (mm) |
|---|---|---|---|---|---|
| 1100 | H14, H24 | Plain Sheet | 0.68 – 9.5 | 2,000 | 6,000 |
| 3003 | H14 | Plain Sheet | 0.49 – 6.35 | 2,000 | 6,000 |
| 5052 | H32 | Plain Sheet | 0.99 – 6.35 | 2,000 | 6,000 |
| 5083 | O, H112 | Plain Sheet & Plate | 0.97 – 120 | 2,000 | 6,000 |
| 6061 | T6, T651 | Plain Sheet & Plate | 1.0 – 170 | 2,000 | 6,000 |
| 7075 | T651 | Plain Plate | 20 – 80 | 2,000 | 6,000 |
Note: The scope above strictly applies to mill-finish plain sheets and plates. Per SIRIM license conditions, surface treatments (such as pre-painted coils) and patterned sheets (such as checker/tread plates) fall outside this specific certificate scope and are quoted under standard mill specifications.
Alloy Selection Guide for Malaysian Engineering & Manufacturing Sectors
To assist Malaysian engineering teams in selecting suitable materials for local projects, our certified portfolio corresponds to the following core applications:
1. General Sheet Metal & Ducts: Alloy 1100 & Alloy 3003
- 1100-H14/H24: High thermal and electrical conductivity, excellent ductility for deep drawing, stamping, and HVAC ducting components.
- 3003-H14: Manganese-alloyed anti-rust sheet, offering approximately 20% higher strength than 1100, suitable for chemical equipment, roofing base sheets, and general industrial enclosures.
2. Marine & Structural Fabrication: Alloy 5052 & Alloy 5083
- 5052-H32: Outstanding resistance to marine atmospheres and saltwater spray. Used extensively for marine sheet metal, fuel tanks, transport vehicle bodies, and architectural brackets.
- 5083-O / H112: High-strength, non-heat-treatable alloy designed for structural marine hulls, ship superstructures, offshore platforms, and pressure vessels operating in coastal tropical conditions. Available in heavy plates up to 120 mm thickness.
3. Precision Machining, Tooling & Fixtures: Alloy 6061 & Alloy 7075
- 6061-T6 / T651: The primary structural alloy for automated equipment parts, jig and fixture bases, and precision CNC turning/milling components. Thicknesses extend up to 170 mm with stress-relieved stretching (T651) to minimize distortion after CNC cutting.
- 7075-T651: Ultra-high-strength zinc-magnesium alloy for high-stress mechanical parts and plastic blow molds. Our certified supply strictly covers plate thicknesses from 20 mm to 80 mm.
Compliance, Export Logistics & Seaworthy Packaging for Malaysia
Operating as a direct mill supplier, Mingtai Aluminum works with industrial distributors, stockists, and EPC contractors across Peninsular and East Malaysia.
- Certificate Traceability: Each production lot is cross-referenced with heat numbers and original Mill Test Certificates (MTC) conforming to EN 10204 3.1, SIRIM MS 2040 compliance.
- Export Seaworthy Packaging: Standard export packaging includes neutral or interleaved paper/plastic protective film, desiccants inside moisture-proof barriers, heavy-duty wooden skids or fumigated wooden crates (ISPM 15 certified), and steel strapping to withstand tropical marine shipping humidity.
- Container Loading: Standard 20GP and 40GP container stuffing designed for easy forklift unloading at Malaysian port warehouses.
You can contact us at any time, and we will provide a quote.
FAQ
Q:What standard does the SIRIM certificate for Mingtai Aluminum cover?
A:Our certificate is issued by SIRIM QAS International under standard MS 2040:2017, which governs aluminum and aluminum alloy sheets and plates.
Q:What is the corporate relationship between Henan Mingsheng and Mingtai Aluminum?
A:Henan Mingsheng New Material Technology Co., Ltd. is a wholly owned manufacturing subsidiary of Henan Mingtai Al. Industrial Co., Ltd. (Mingtai Aluminum). The manufacturing facilities, quality management, and export documentation operate directly under Mingtai Aluminum's consolidated industrial operations.
Q:Does the SIRIM certificate cover aluminum checker plates or coated coils?
A:No. The current SIRIM MS 2040 license explicitly covers mill-finish plain aluminum sheets and plates (alloys 1100, 3003, 5052, 5083, 6061, and 7075 within specified thickness limits). Checkered sheets, stucco embossed sheets, and pre-painted coils are manufactured under regular ASTM/EN mill standards and are not listed on this specific SIRIM certificate schedule.
Q:What is the minimum thickness available for 7075-T651 under this supply scope?
A:For 7075-T651 aluminum plain plate, our production and certified thickness starts from 20 mm up to 80 mm. We do not supply thin-gauge 7075 sheet under this certified program.
