For large-scale roofing and structural cladding projects (such as the domes of large grain silos), it is important to consider tolerances and width when purchasing extra-wide aluminum coils.
We had a client from the Middle East who, after visiting our factory, signed a contract for 3003-H16 aluminum coils, 1.26 × 2600 × COIL, totaling 80 metric tons, to be used in a large grain silo dome project.
Why the Client Ordered All 80 Tons in a Single Batch
This is an engineering order. Initially, we recommended placing a 20-metric-ton trial order first, with the remainder to be purchased after confirmation. However, after the client visited our factory to inspect our production line, they decided to purchase the entire 80-metric-ton order in a single transaction.
This decision by the client reflects two key factors in the construction of structural roofs and silos:
- Consistency between batches: Dome panels used throughout the roof structure must maintain a high degree of consistency in flatness, strength, and surface appearance. Producing the entire 80 metric tons in a single batch ensures a high degree of uniformity in alloy composition, rolling parameters, and material temper.
- Project schedule continuity: If the order were split into two production runs, the construction site could face risks of schedule delays or logistics bottlenecks due to coordination issues between production cycles. Purchasing the entire order volume at once eliminates the need to wait for the second batch of aluminum coils.
Contract Specifications: 3003-H16 Wide Aluminum Coils (80 Tons)
| Specification Item | Contract Requirement |
| Alloy & Temper | 3003-H16 |
| Dimensions (Thickness × Width) | 1.26 mm × 2600 mm × Coil |
| Order Quantity | 80 MT (±10% tolerance) |
| Applicable Standard | ASTM B209 |
| Production Route & Quality | Prime Quality, DC route |
| Surface & Edge Condition | Mill finish, mill edge |
| Thickness Tolerance | +0 / -0.04 mm |
| Width Tolerance | +2 / -0 mm |
| Flatness | Within 25 mm |
| Max Coil Weight | 4 metric tons per coil |
| Coil Inner Diameter (ID) | 508 mm |
| Coil Outer Diameter (OD) | 970 – 1000 mm |
| Packaging Orientation | Horizontal cradle packing (Eye-to-wall / lengthwise loading) |
| Export Marking | Standard neutral export packaging (without mill/Mingtai marking) |
| Loading Port | Qingdao or Tianjin, China |
| End-Use Application | Large grain silo dome / roofing |
Container Loading & Export Packing for 2600 mm Wide Coils
Shipping coils wider than 2350 mm requires careful container planning. Standard 20' GP and 40' GP ocean containers have the following typical internal dimensions:
- Internal Width: ~2,350 mm
- Internal Height: ~2,390 mm (door opening height is ~2,280 mm)
Because the 2,600 mm coil width exceeds both the internal width and height of a standard GP container, these coils cannot be loaded standing upright (eye-to-sky) or placed crosswise across the container floor.
To ship safely in standard containers, we use horizontal cradle packing:
- Each coil (with an OD of 970–1000 mm and max weight under 4 tons) is secured horizontally on heavy-duty wooden saddles/cradles.
- The coils are positioned lengthwise inside the container so the 2,600 mm strip width aligns with the container's length, then blocked and braced to prevent shifting during sea transit.
- For buyers requiring neutral documentation or distributor protection, we supply standard export packaging without Mingtai branding or mill markings, as specified in this contract.
Current Active Production: 1.2 × 2590.8 mm 3003-H16 Aluminum Coils
If your project uses similar extra-wide 3003-H16 coil formats, our mill is currently running the following specification on the production line:
- Alloy & Temper: 3003-H16
- Thickness × Width: 1.2 mm × 2590.8 mm
- Core Type & ID: 508 mm paper core
- Packing Method: Horizontal (lying) export packing
- Single Coil Weight: Approx. 3 metric tons
The dimensions of this batch of aluminum coils are close to 1.26 × 2600, which clearly demonstrates our ability to mass-produce this type of product with consistent quality.
FAQ
Q1: Can 2600 mm wide aluminum coils fit into a standard 20' GP or 40' GP container?
A: Yes, provided they are packed horizontally and loaded lengthwise. Since a 2600 mm width is larger than a GP container's internal width (2350 mm) and height (2390 mm), the coil cannot stand upright (eye-to-sky) or sit crosswise. With an outer diameter of 970–1000 mm, horizontal cradle loading along the length of the container fits cleanly within standard container limits.
Q2: Can you provide neutral export packaging without factory branding?
A:Yes. Standard export packaging can be prepared without Mingtai markings or mill logos upon contractual request, as we did for this 80-ton Middle East engineering order.
Q3: What ports are used for export shipments?
A:Shipments for wide-format aluminum coils are typically dispatched from Qingdao Port or Tianjin Port, depending on vessel schedules and destination routes.
Discuss Your Wide Aluminum Coil Requirements
Whether you need 2590.8 mm – 2600 mm ultra-wide 3003-H16 coils for silo domes, industrial roofing, or custom fabrication, we can review your technical tolerances, packing preferences, and container loading plan.
Contact our export team today to discuss:
- Available payment terms
- Current production lead times and delivery schedules
- Custom widths, coil weights, and neutral export packing requirements
Contact Us: https://www.aluminum-alloy-price.com/contact-us/
Email: sales01@mingtai-al.com
WeChat/Whatsapp:+86 193 3780 2645